Mechanical Seals For Gorman-Rupp Pumps

1, Working Parameters
Temperature：-20~150℃
Pressure：≤1.2MPa
Speed：≤10m/s

2, Materials
Static Ring：Q1,Q2,U2,
Dynamic Ring：Q1,Q2,U1,U2,
Rubber Parts：V,P,E,A
Springs and Structural Parts：F,G,G1,M

3, Applicable Media：Clean water, sewage, oil and other weakly corrosive media.

4, Directions：The FXTP2 mechanical seal features a large spring drive design, making it a great solution for tight spaces where screwing is difficult, and is easy and convenient to install.
This mechanical seal is an unbalanced large spring and rubber assembly design. It can effectively solve the problems of shaft wear and space limitations.
The principle of this mechanical seal is that after the shaft rotates, the rubber holding the shaft rotates. The rubber is a whole, and the rotation of the dynamic ring is driven by the rubber, which better ensures the sealing of the rubber and the dynamic ring, and also increases the floating performance of the dynamic ring, which can well meet the sealing effect of the pump. The large spring provides the initial sealing of the mechanical seal and the compensation of the dynamic ring during use. The pitch of the large spring is relatively large, and it is not easy to block the spring in the medium containing a small amount of particles, thereby making the mechanical seal last longer.

5, Our company has a strong design and development team, which can recommend and customize mechanical seal products that are more suitable for you according to different customer needs.

Hot Tags: mechanical seals for gorman-rupp pumps, China mechanical seals for gorman-rupp pumps manufacturers, suppliers, factory, John Crane 1 Mechanical Seal